IoT Use Case - Battery Powered Device

Battery-powered devices are comfortable to use but have also some major issues. Especially during the development, some important aspects must be taken into consideration, unfortunately it is not just replacing the power plug. In the first episode of my new series, “IoT Use Case”, I want to focus on the topic of “battery-powered devices” and give you some of my main take aways from the experience I was able to gain in real projects.

Internet of things and connected devices essential idea is to connect easily everything to everything or at least to a joint control center to gather the data and derive or gain new knowledge from the data to make our environment more intelligent/efficient. The concept of purely battery-powered devices fits perfectly with this idea, especially if you want to fulfill the requirement “easily”. Just an example.

Besides all concerns about the ecologic footprint, waste etc. which are fully relevant in the case of batteries, just think about any device on the market. Now imagine you can use this device with a cable or without and think about the gain of comfort if no cable is available. To be honest, I guess there are very few examples where someone will buy a cabled device if the usability of the one without batteries is comparable. With usability, I don’t mean a nice user interface but the holistic usability like e.g. battery lifetime is enough for 90% of your use cases, response time to your inputs is less then 400 ms, connectivity is available if you need to send or receive data etc.

Below I summarized some important engineering topics which shall be considered during the development of battery-powered IoT device to let you focus on the usability part and create more great devices for the market.

Real World Examples

As an intro to the topic, I want to show you some battery powered device which is available on the market to show the diversity and describe shortly the characteristic differences.

As we will see below, the products target different market segment with different requirements and also different solutions. For every of them, an alternative battery concept fits better, some can be easily recharged after some days because it is accepted by the user that devices of active daily usage must be recharged. Others are working according to the principle “equip and forget”.


Let’s start with one of the more popular ones from the consumer domain, the Fitbit wristband, activity tracker is also available as a smartwatch. Besides the motion detection and tracking functionalities, Fitbit has also some comfort functions e.g.leds are blinking to visualize an incoming call. But the comfort functions are not in the scope of this article, but the main functions are.


Following functions are relevant from the “battery-powered device” point of view

  • BLE as communication interface
  • Rechargeable battery
  • Only some days battery lifetime after battery recharge
  • Motion detection as sensing function (main Function)

Operation Condition given in the datasheet:

  • -10°C – +45°C (operating)
  • -20°C – +35°C (non-operating)
  • 20% – 75% relative humidity

Temperature profiles are typically not given, the one below is my personal assumption:

  • Normal Operation temperature (90% of the time)
  • Maximum values (must be survived without damage)
    • Min. -20 °C – if the device was forgotten in Norway or Alaska in the Car
    • max. 70 °C – if the device was forgotten in Miami in the Car.


BLE Beacon

Another device from the consumer market but with a different task. Tracking devices for things of daily use. The device itself has very limited logic inside, the only function is to send BLE advertising packets from time to time to allow the mobile app to determine whether a tracker is still in the near neighborhood or not.

BLE Beacon

Following functions are relevant from the “battery-powered device” point of view

  • BLE as communication interface
  • Non-Rechargeable battery – CR2032 Lithium coin cell ~230 mAh
  • Very small size
  • Up to 1 year lifetime with one battery
  • Tracking using BLE Link Information (RSSI Value)

Operation Condition given in the datasheet:

  • +5°C – +45°C
  • 20% – 75% relative humidity

My personal temperature profile assumptions :

  • Normal Operation temperature (90% of the time)
  • Maximum values (must be survived without damage)
    • min. -40 °C – if the key with the device was lost outside in northern parts of the world
    • max. 70 °C – if the device was forgotten in Miami in the Car.


Parking Sensor

Another real-life use case for battery-powered IoT is a parking sensor. No, I do not mean the one inside the car to determine the distance between an obstacle and the car. I mean a parking sensor which is placed on the parking slot and detects whether the parking slot is occupied or not.

Parkin SensorFollowing functions are relevant from the “battery-powered device” point of view

  • LoRa or Sigfox or Cellular or Propritary Communication Protocol, sometimes in parallel with BLE
    • NEDAP’s information allow the assumption that something proprietary is used (ISM band)
  • Non – Rechargeable battery
  • Multiple years lifetime (3-5) is a common and realistic request
    • NEDAP claims to run up to 10 years
  • Obstacle detection (IR, Radar, Piezo)
  • Metal detection (Magnet sensor, induction sensor)
  • Complex algorithms possible to run in each sensor

Operation condition given in the datasheet:

My personal temperature profile assumptions :

  • Normal Operation temperature (90% of the time)
  • Maximum values (must be survived without damage)
    • Min. -50 °C – if the sensor is used in northern parts, the temperature can fall also below -40°C
    • max. +85°C – if the device is used in southern parts of the world directly exposed to sunlight.



Let’s speak initially why battery powered IoT devices are that common. Well, there is a mass of advantages. The main one is sure, an esthetical one …

  1. You will not see any cables which don’t fit the interior design

following here are some others

  1. There is no need to install any cables .. shorten the installation time extremely
  2. Therefore there is also no need to hide any or place them with respect to safety regulation (e.g. in industrial environments)
  3. No cables means no limitations where to install a sensor
  4. A battery already serves DC power, there is, therefore, no conversion from AC needed which means, no big power supplies means very small sensor sizes possible.
  5. Stay in operation also if main power is off.


As every technology also battery powered devices have some disadvantages and restrictions. Below I’ve summarized the main one:

  1. Labeling obligation and transportation restrictions. Due to the fact that batteries, rechargeable or not, are made to store energy, the energy can also be released very fast (explosively). Therefore devices with batteries must be handled carefully and marked with a specific label to call attention to.

Lithium ForbiddenLithium Warning

  1. Recycling. Batteries contain substances which can endanger the environment. To reduce the pollution many countries regulate the battery recycling by law e.g. Germany, Austria, Swiss, Sweden. Further, in Germany also the manufacturer may be required to implement a return system for industrial batteries,

  2. Limit in Usage. While not connected to “infinite” power source, battery-powered devices cannot, or only with limited possibilities, fulfill specif scenarios, like data streaming.

  3. RF interface is a must. Due to the fact that any cables are missing, a radio-based communication technology must be used. From the implementation point of view RF, technologies requires a specific skills for hardware development as well as for software development. Also debugging possibilities in the field are very limited, and security requirements are higher than with a cable connected solution. Further, RF based device must pass specific certification procedures to be ready for the market.

What shall be considered during development

After having a very general look on some of the main advantages and disadvantages, let’s focus on some important details which shall be definitively considered during product development.

Self discharge make storage very hard

All batteries and accumulators are affected by the phenomena called “self discharge”. This is exactly the reason why the accumulator in you camera or your battery-powered screwdriver is always empty when you want to use them.

Depending on the technology and the substances used in the battery, the amount of self-discharge energy varies. Below you can see a table with the common battery technologies and self discharge rates

Battery systemEstimated self-discharge
Primary lithium-metal10% in 5 years
Alkaline2–3% per year (7-10 years shelf life)
Lead-acid5% per month
Nickel-based10–15% in 24h, then 10-15% per month
Lithium-ion5% in 24h, then 1–2% per month (plus 3% for safety circuit)


As you can see in the list, lithium-metal batteries are the one with the lowest self discharge rate, but also the most expensive one. For accumulators there are nearly no ways around the Lithium-ion technology.

Depending on the use case and product which is in development, consumer grade or industrial grade primary or secondary cells are required. While consumer grade batteries are made for normal temperature ranges and moderate use, industrial batteries can be used in environments with temperatures up to 125°C and secondary cells withstand a lot more recharge cycles then the consumer one. While the consumer manufacturers are well known, industrial are not. Therefor here are some of them I already was working with before.

Examples for professional/industrial battery manufacturer

Operation Temperature Profile

Owners of a mobile phone may observe the behavior by themselves, during warm summer the battery do not last that long. Batteries and accumulators are extremely sensitive to temperature changes. Here we make a turn to the self discharging characteristics of a battery. Below you see a chart of an lead acid battery pack. The chart is based on empirical data.

Lead Acid Self Discharge Chart


Here is an other visualization. In this case Tadiran SL-500, lithium-thionylchlorid battery, in the size AA was tested. This battery is specified to be used for environment temperatures up to 130°C.

lithium-thionylchlorid battery Chart


As you can see, high temperatures cause a significant increase of the self-discharge rate and can lead to a faulty battery, leakage of the chemical or even explosions of a battery. Having this information you can imagine that is extremely important to have a good knowledge about your operating environment to have a chance to provide, at least, a guess about the device lifetime.

We were talking about the leakage of chemicals and possibilities to explode, this is a good keyword for the next topic.

Specific environments- Explosive (EX) / Food Safety

Explosive environments are areas with very restrictive requirements to everything and everyone which operated there, HERE a short overview about ATEX. Depending on the classification, even the smallest spark can lead to a catastrophe with danger to human life. The main task of batteries, on the other hand, is to store electrical energy … big amounts of energy. This energy can quite the mechanical housing very quickly due to

  • overheating
  • mechanical damage
  • short circuit (inside and outside of the battery)
  • overcharge
  • etc.

Below is a nice video for a demonstration. I choose intentionally the one with the smallest batteries and not with the biggest explosions to sensitize and not to have a reaction like “our batteries are much smaller, so no reason to worry”.

But not only the possibility to explode can endanger human lives, also the chemicals inside the battery are extremely dangerous. Therefore during operation of a battery-powered device in food production areas contamination of the production must be excluded. Here are some information about the chemicals inside the batteries.

Weight tolerances

Some use cases, especially in industrial environments, require a maximum and/or static device weight. Batteries weight can vary even in the same margin from one manufacturer. In, non-representative and non-public, tests we had a variance of +/- 10% with AA batteries. Definitive differences exist in between chemical compositions.

Wikipedia states the weight of an AAA Alkaline battery with 11.5 grams while lithium AAA batteries weight about 7.6 grams. Source


Passivation is a characteristic of lithium batteries which on the one hand results in very low self-discharge rate, and therefore in very long lifetimes, and on the other hand case a voltage drop if a device was switched on after a long period without operation (without any load on the battery). Below you can see the effect of passivation.

Voltage drob due to passivation


After initial switch on (first run), a voltage drop due to passivation effects occur which is not happen during normal operation. The effect restores during long transport or storage phases and must be taken into consideration also during the firmware development.

Passivation itself is a very thin, high resistant, film on the anode of the battery. It arises itself and is removed by battery load in normal operation.

More Information about the passivation phenomen

Lifetime calculation required

An essential task required for every product development of a battery-powered IoT product is the battery lifetime calculation. In general, it is an excel sheet or a script merging following information together

  1. Battery capacity (the most confident one)
  2. Operation temperature profile and storage concept
  3. Battery self-discharge rates
  4. Software timing concept including sensing and communication intervals
  5. Power consumption rate of each component in the system
  6. Power consumption for unique or not calculable events

All this mixed to a complex calculation model allow you to predict the expected lifetime of your device more or less exact. The trick is to find the right balance in between of detail-depth and accuracy.

Unfortunately, I can not recommend any template, script or piece of software for this work, just because I don’t know any and create them by my own.

Tests are limited or do not represent the operation

Tests are an essential part of the product development. Typically every resort performs there own module/unit tests in parallel to the development. As soon as bigger parts are ready, integration tests are done and at the end, the complete system is tested.

In the best case, the tests are done with a system which is as identical as possible with the final one. The usage of a battery in the system often limits this test. For example, endurance tests are often performed in a climate chamber under temperatures which indicated the limit in normal operation. The climate chambers one can by on the normal market do not allow tests of devices equipped with a battery, due to possible explosions, therefore the tests must be performed with a static power supply. A similar problem exists also for vibration test equipment. In software tests where a debugger is used, batteries must be disconnected because the debugger typically powers the device under test. Other software tests increase the number or length of messages send through the RF link, this typically reduces the battery lifetime significantly.

Communication technology has a huge influence

To keep a good overview in the article I will focus only on a limited number of manufacturers and there on SoC or Module solutions. My expectation is that in a development project a qualitative MCU and Wireless Technologie evaluation is performed to choose the perfect technology for the dedicated products. Further, I will not cover all possible technologies but focus on the most common one.

Please be aware that all numbers below are used just to show the difference between the technologies and are not evaluated by me. The real numbers can vary depending on use case, environment, settings and much more. All numbers are rough values taken directly from the linked data sheets. If a value range was given I choose the middle, in the case that RX power was not given I used the TX power.

Wireless TechnologyRX PowerTX PowerRangeReference Data From
Bluetooth Low Energy (BLE)6 mA6.1 mAshort rangeCC2640 (TI)
Wireless Lan55 mA170 mAmid rangeCC3220 (TI)
Sigfox13mA36mAlong rangeATA8520E (atmel)
LoRa22mA40mAlong rangeCMWX1ZZABZ (Murata)
NFC6mA6mAshort rangenRF52832 (Nordic)
ZigBee6mA8mAmid rangeCC2630 (TI)
GSM180mA180mA (! 1,5A burst for first TX)mid / long rangeSARA-U2 (u-blox)

Surely beside the pure power consumption numbers, there are also other factors which have to be taken into consideration like the used frequencies, message size, specific configurations like spreading factors and much much more. All these topics can fill dozens of separate posts with content and will not be covered in the current one.

For a possible project, just keep in mind that the communication channel is often the most power consuming part of the system which have to be chosen carefully and which often decide about the success or failure of the IoT device on the market. If you discuss with suppliers about possible RF technologies keep following in mind:

  • discuss with technicians, FAEs, and engineers not sales.
  • show your concrete use case, challenge them
  • show how many messages you want to transmit per hour/day / week
  • ask whether additional equipment is required e.g. gateways
  • ask what can be done to cover areas which are out of range
  • ask about regulations
  • ask about different coverage in different countries


Software behavior and timings influence power consumption

Besides the chosen components also the software behavior is an important part of the power model. Early and detailed planning of the software timings and functionality can show you the problems of the planned system but also save your projects.

  • Do you plan to build a sensing device without any algorithm intelligence? The most important part will be to synchronize the sensing time slots with the communication time slots to prevent burst on the one hand but also not to lose to much power during wakeup and initialization of the bus systems on the other.

  • Do you have the possibility to use optimized subsystems for specific tasks like a sensor controller engine, DMA, behavior driver interrupts while the controller core stays in standby. Make use of them.

  • Do you plan to implement some logic on the device e.g. some algorithms to filter the values or calculate results. Check whether you will need a floating point unit (FPU) for that. Calculate floating point values on controllers without FPU costs a lot of energy.

  • Check carefully the states of all your bus systems (e.g. I2C, SPI) during the development. Are disabled?

  • Are firmware updates over the air (OTA / FOTA) planned, choose a proper strategy (No clue about FOTA? –> FOTA – Firmware Over-The-Air – What is behind)

  • Measure the power consumption of characteristic processes in the software before each release.

  • Establish coding guidelines for power-save programming in your software team. I don’t know about any public coding guidelines but I can imagine at least 2 or 3 projects where some of my routines can be written more efficiently, thankfully these products are not powered by batteries.


As already stated in the introduction, one of the main restrictions and disadvantages of battery powered devices is the ecological factor. To produce a battery with a specific amount of energy, much more energy is required than just to get this energy from the normal power socket, the energy balance is higher.

But especially the chemical substances, which are a substantial part of every battery, are very dangerous for nature and must be disposed of carefully. Below you can find some directives from Germany and the European Union about the disposal of batteries. The good news, most of the batteries can be recycled if they are disposed of carefully.

Product Requirements: What to clarify with the customer

As the last part of the article, I wanted to give you a list of question you can use during the communication with your customer to avoid unrealistic specification and requirements. Here we go:

Device size limitation

Clarify whether there is a physical limitation of the device size e.g. due to the installation conditions. If there are no identify the pain point of the customer regarding the device size. This information is very important for the question what type and quantity of batteries can be used and is logically also a precondition for all the other discussions. Here are some examples.

  • Device size is hardly limited to the size where only one coin cell can fit in but the customer wants to have GSM connectivity and a lifetime of multiple years –> physically impossible, in the best case the coin cell will survive one time the connection phase burst and die
  • Device size is limited due to the common device sizes on the market where 2xAA cells will fit in and the customer request a BLE connectivity with small amount of messages per day and the requirement to have a lifetime of at least 2 years –> great combination there are a lot of ways for optimization in size and power consumptions. With good planning, the size of the device can be reduced significantly where the lifetime will reach 2 years or more and therefore create a USP for the customer. Good sales on your side can sell this benefits to the customer and increase the turnover and profit for the project significantly.

Maximum operation temperature (>100 °C is very critical)

Often customer, especially the one which is typically not operating with electronics, do not know about the importance of the maximum temperature. High temperatures can lead the soldering points to get brittle but also your battery to not perform like expected or even be a real danger for human life if it explodes.

With maximum temperature over 100°C projects can become unrealistic, depending on the other requirements like device size, limits on stored energy, long lifetimes, explosive environments, restrictive BOM costs.

Operation Temperature Profile

Do not accept specifications like “from 0 to 60 °C most of the time” ask again and again for a detailed profile. Often the customer does not know about the battery behavior at different temperatures. Invest some time and create a calculation model to visualize what it means if you assume only the worst case scenario due to the fact that you do not have a detailed one.

Often the customer realizes the importance after having the definitive numbers and give you a profile like:

  • 0°C – 10°C – 10% of lifetime
  • 10°C – 30°C in 70% of lifetime
  • 30°C – 50°C in 15% of lifetime
  • 50°C – 60°C in 5% of lifetime

This is already a success, with this number and the knowledge of the required lifetime, e.g. 3 years – 1095 days, you have the possibility to formulate more detailed system requirements for example:

  • Sensor shall stay operable at temperatures of 0°C – 10°C for 109 days in lifetime
  • Sensor shall stay operable at temperatures of 10°C – 30°C for 766 days in lifetime
  • Sensor shall stay operable at temperatures of 30°C – 50°C for 164 days in lifetime
  • Sensor shall stay operable at temperatures of 50°C – 60°C for 56 days in lifetime

In this case you have definitive numbers you can test against and dependencies to any other metrics. And you can also create a more accurate lifetime calculation model for your customer.

Battery is not completely empty when device stop working

This is often the wrong conclusion of people who do not work with electronics and is not interested in this area at all. By the end of the lifetime, the battery still contains electrical energy but the voltage is low to drive the electronic components which require the voltage being in a specified range.

For some application an totally empty battery is beneficial for this purposes, a specific circuit must be planned and designed to convert all the remain energy in the battery in e.g. heat.

Expectations to the battery level indicator

Every day we use battery-powered devices, smartphone, laptops and much more, which show us an accurate battery level indication, at least this is our expectation. Often this expectation is transported also to IoT device development. Here is some shocking news.

  1. The battery level estimation in laptops and smartphone also do not work that accurate due to the simple fact… no one can foresee the future
  2. Pure voltage measurements can just give the information whether the battery is ok or already bad. There is nothing in between.
  3. The battery level indication in high-performance device, e.g. laptops, is a combination of hardware measurements and lifetime logging information

For IoT device, there is often no energy or space available to implement an additional logging feature to calculate the remaining time. On the other hand, many factors, like temperature, current consumption etc., influence the current battery load and the remaining time.

Below you can see the typical battery discharge curve for a 12V battery independence to the current load at a constant temperature. As you can see the graph is very flat the very first time an falls rapidly as soon as the battery reaches the end of life. The abruptness of the transition point increase with the current load. In a battery powered device the goal is to reduce the current consumption which brings you to a very flat graph over the complete lifetime and an abrupt voltage decrease very close to end of life.

Battery Discharge

Ask your customer about the expectation, explain the limitation and physics.

What communication technology is preferred

Like stated in the section about the communication technology affects the battery lifetime significantly. Ask the customer about the main use cases instead of specific technologies and propose a solution based on objective figures and reasons instead of “someone said something facts”.

Example: often, if the task is to get the information from a big number of devices, BLE technology is excluded due to the “pseudo fact” that it can not be used with more then 7 devices, it is partly true. 7 devices if they are connected simultaneously to the master. But if devices wake up from time to time just to send some bytes of data, you can connect multiple thousand devices to one master … theoretically as well as practically.

Expected Lifetime

Take a realistic discussion with your customer about the lifetime, show him the physical limitation due to the requirements, environment, market, technology etc. Provide a detailed lifetime calculation to support your expertise and show ways where the solution can be optimized.

Replacement or not

Clarify if the device shall live exactly as long as the battery or the battery shall be replaceable. The decision give the project more or fewer possibilities or limitations.

Rechargeable or not

Clarify if maybe the device can be recharged. Rechargeable batteries often show a better voltage stability and have a better energy balance. The decision give the project more or fewer possibilities or limitations.

You might also like More from author

Leave A Reply

Your email address will not be published.